Get Some
General => Technology & Hardware => Topic started by: Xsannz on October 29, 2015, 07:38:00 am
-
Here is a picture of the existing components back: link http://m.imgur.com/gallery/pFE6jRA (http://m.imgur.com/gallery/pFE6jRA)
It is a 50k 1 turn potentiometer with center detent, 6mm diameter knurled shaft, 9mm length and a spst push button momentary switch. I haven't had any luck trying to determine the manufacturer of the component or a replacement that ticks all of the above boxes. If anyone is able to help, it would be greatly appreciated!
-
I posted here, and then xsannz deleted my post
In light of this am hereby declaring this thread de-railed
Who likes potatoes?
-
fuck yes
-
I posted here, and then xsannz deleted my post
In light of this am hereby declaring this thread de-railed
Who likes potatoes?
pffft, potatoes,,, got fries with that...
-
To like the potato you must become the potato.
(http://www.jbw-studios.com/mascots/mascot_potato.jpg)
Are you ready for this journey??
-
(http://technabob.com/blog/wp-content/uploads/2011/12/eb0a_portal_2_potatos_science_kit_anim.gif)
-
MASHED WITH CHEESE UP IN THIS!
-
Its a Piher product. im currently hunting to see if i can find a replacement switch.
edit: well shit. they dont make it easy. i'll try again tomorrow at work - to either find a match or one that will do the exact same thing
-
Its a Piher product. im currently hunting to see if i can find a replacement switch.
edit: well shit. they dont make it easy. i'll try again tomorrow at work - to either find a match or one that will do the exact same thing
dude that would be legend
not worried about dimensions just that it has the functionality as above and a knurled shaft
-
- - Updated - - -
Additional photos
http://iforce.co.nz/i/3i1h3tfi.4cu.jpg (http://iforce.co.nz/i/3i1h3tfi.4cu.jpg)
http://iforce.co.nz/i/h12rf032.n2p.jpg (http://iforce.co.nz/i/h12rf032.n2p.jpg)
-
got a reply from potentiometer.com, R technical Australia and they all do custom stackable units, that they cant make a center detent with momentarty switch.
but some bastard must have done it, since i have 2 of them in the device.
-
PANASONIC - EVU-E3JFK4B54 have a look at this?
-
PANASONIC - EVU-E3JFK4B54 have a look at this?
danm close, but no center dentent, which i really need to be able to pause between a + axis and a -axis
ok so
momentary push is the switch type, the detent is not switched its just a mid position, as far as i know,
i might break out the multimeter tonight and just check the centre detent is not switched as well.
-
My spec sheet says they have mid point detent. And I think I have used them for audio balance adjustment on a mixing board I've fixed for a mate.
-
My spec sheet says they have mid point detent.
yeah but i think they have the switch on the midpoint detent. but no push momentary switch..
-
Yeah sounds like you've got a pure custom part on your hands. Very slim chance you be able to find a replacement sort of raid saiteks factory.
-
Wait a minute, is this broken thingy in the yoke you're selling?
-
Wait a minute, is this broken thingy in the yoke you're selling?
NOPE.
I have the warranty replacement ones in a box thats what i am selling, the parts are to fix a mates X52 Pro
the parts are in the x52 pro and the X55 are the same in the throttle units
i am selling the X55, but i would love to be able to find the parts as i started an arduino project to build my own flight panel.
since the Warthog setup i have doesnt have enough momentary toggles which most games use rather than on of hold style toggles.
-
What are you doing posting about weird electricity shit in a potato thread?
-
What are you doing posting about weird electricity shit in a potato thread?
because
(http://www.ibselectronics.com/images/potato_semiconductor_270.jpg)
-
Well what do you know, it's a potato chip.
-
(http://i.imgur.com/xgz9nkR.gif)
(http://i.imgur.com/O5h2sob.gif)
-
(http://www.cmcstir.org/pr/jardinepr/wp-content/uploads/2015/01/simpsons-thumb.jpg)
-
Well what do you know, it's a potato chip.
I lold